Digital Promoters
Digital Promoters

DIGITAL INDICATOR

MODEL 408M

  • It is a low cost high performance indicator which offers high accuracy of ±0.25% of full scale.
  • This model can be used for Pt 100, five different types of thermocouples and four types of linear inputs.
  • 408-M is easy to operate and configuration

LARGE DISPLAY INDICATOR

409 - 4IN

  • It can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation.
  • It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator.

INDICATORS

MODEL 408-2IN

  • Microprocessor based large display indicator
  • High accuracy
  • 8 selectable input types
  • 4 digit LED display of 45mm (1.8”) high
  • Built-in Transmitter Power Supply
  • 192 x 96mm enclosure
  • Excellent longterm stability
  • Easy configuration from front keys
  • Digital calibration

CONTROLLERS

MODEL 5006RN

  • Universal input (TC, RTD, Volts, mA)
  • Fail-safe Design protecting the process in case of system malfunctioning
  • Bright Red seven segment LED Display
  • Display brightness control
  • Status Indication LEDs
  • Relay Output
  • Re-transmission output (optional)
  • RS485 Modbus Communication (optional)
  • Transmitter Power Supply

CONTROLLERS

MODEL LC 5296H

  • Auto-tune PID
  • Universal input (TC, RTD, Volts, mA)
  • Accuracy 0.25% of F.S.
  • 15 Alarm configurations.
  • RS485 Modbus Communication.
  • Retransmission with accuracy: 0.25% of F.S.
  • Fail-safe Design protecting the process in case of system malfunctioning.
  • Display brightness control.
  • Transmitter Power Supply.

CONTROLLERS

MODEL 5002U-P

  • Universal Input selection
  • Premium ON/OFF or Proportional controller Transmitter Power Supply
  • Fast Loop response time of 250mSec
  • Up to 4 Independent programmable relay output
  • 22 Alarm types High Accuracy of 0.1% FS
  • Retransmission output (Optional)
  • RS485 port with Modbus RTU protocol (Optional)
  • Input Scalability for Linear input type
  • Output Scalability for all input type
  • Square Root Extraction for Linear input type
  • Settable Digital Filter 0-60 Sec
  • Password Protected menu to avoid unauthorized access
  • Unique one shot Calibration method

PID CONTROLLERS

MODEL 5040

  • Universal Input, 17 Input types.
  • Universal output including Valve positioner (with and without feedback) output.
  • Universal Power Supply
  • Fast Loop response time of 250 msec.
  • Digital filter with brightness contol.
  • 4 Relay and 4 Digital outputs freely configurable for Control, Alarm and events.
  • 18 Alarm types.
  • Levels of configuration and password protection.
  • All Configuration and Calibration from front panel keypad.
  • Auto tune PID with cascade and Ratio control.
  • Auto/Manual selection with bump less transfer.
  • 4 Digital Inputs for remote operation.
  • 2 Isolated Analog outputs for contrl/Re-Transmission.
  • Isolated communication port with Modbus RTU protocol.
  • Draw-out design for ease of maintenance and replacement.

PID CONTROLLERS

MODEL LC 5248-AT

  • 1/16 DIN package.
  • Auto-tune PID.
  • Universal input (TC, RTD, Volts, mA).
  • Accuracy 0.25% of F.S.
  • Two Outputs (Relay/SSR).
  • Fail-safe Design protecting the process in case of system malfunctioning.
  • Display brightness control.

PID CONTROLLERS

MODEL LC 5296-AT

  • Auto-tune PID.
  • Universal input (TC, RTD, Volts, mA).
  • Accuracy 0.25% of F.S.
  • 15 Alarm configurations.
  • RS485 Modbus Communication.
  • Retransmission with accuracy: 0.25% of F.S.
  • Fail-safe Design protecting the process in case of system malfunctioning.
  • Display brightness control.
  • Transmitter Power Supply.

PID CONTROLLERS

MODEL LC 5296L - AT

  • Auto-tune PID
  • Universal input (TC, RTD, Volts, mA)
  • 15 Alarm configurations
  • RS485 Modbus Communication (optional in LC5296-AT / LC5248E-AT model)
  • Retransmission Output (optional in LC5296-AT / LC5248EAT model)
  • Relay / SSR control output option
  • Password protected configurations
  • Auto/Manual selection with bump less transfer
  • Fail-safe Design protecting the process in case of system malfunctioning
  • Display brightness control
  • Transmitter Power Supply in LC5296-AT/LC5296L-AT/ LC5248E-AT model
  • Function Key : Selectable for RUN/STOP or Auto/manual or none.(LC5296L-AT/LC5248L-AT)
Due to continuous development more products are being added periodically, please contact us for products not listed here.

© Digital Promoters | website promotion India | website designing India | softlogics & developments