Din sized enclosure for Track (Din rail) / Screw mounting.
Front terminal protective cover for safety.
LED indication for timing in progress.
A1DA :External (zero volt / potential free) command contact for timing initiation.
ELECTRONIC TIMERS
A - SERIES
MODELS: A1D1, A1D1(WB), A1DA, A1DS, A1DH-1
Din sized enclosure for Track (Din rail) / Screw mounting.
B1DCA-T : HOLD / RESTART facility during power fail conditions.
B1DCA-T : Auto / Manual switch for mode of operation
B1DCA-T : Program - enable / disable facility for tamper proof operation.
B1DCA-X, B1DCA-T : Independently selectable ON & OFF time.
SPP-T :Trips under phase missing, phase reversal or phase unbalance
In manual mode, terminals provided to connect to switch so as to manually switch ON and switch OFF load
ELECTRONIC TIMERS
B - SERIES
MODELS: B1DH-Q, B1DF, SPP-T, B1D-FR
Din sized enclosure for Track (Din rail) / Screw mounting.
B1DCA-T : HOLD / RESTART facility during power fail conditions.
B1DCA-T : Auto / Manual switch for mode of operation
B1DCA-T : Program - enable / disable facility for tamper proof operation.
B1DCA-X, B1DCA-T : Independently selectable ON & OFF time.
SPP-T :Trips under phase missing, phase reversal or phase unbalance
In manual mode, terminals provided to connect to switch so as to manually switch ON and switch OFF load
ELECTRONIC TIMERS
B - SERIES
MODELS: B1DCA-X, B1DCA-T, B1DS
Din sized enclosure for Track (Din rail) / Screw mounting.
B1DCA-T : HOLD / RESTART facility during power fail conditions.
B1DCA-T : Auto / Manual switch for mode of operation
B1DCA-T : Program - enable / disable facility for tamper proof operation.
B1DCA-X, B1DCA-T : Independently selectable ON & OFF time.
SPP-T :Trips under phase missing, phase reversal or phase unbalance
In manual mode, terminals provided to connect to switch so as to manually switch ON and switch OFF load
ELECTRONIC TIMERS
DIGITAL TIMERS
Din Sized enclosure for panel mounting.
Digital dual display for set value and process value.
FUNCTION (programmable): ON DELAY / INTERVAL /CYCLIC ADJUSTABLE.
TYPE OF START SIGNAL (programable) : NO START / PULSE / CONTINUOUS.
One of the relay c/o can be configured as INSTANT or DELAYED.
Program lock is provided for function, relay configuration, type of start signal and range selected.
RESET cum START facility can be achieved either through front buttons Or Rear terminals
HOLD/RESTART facility during power failure conditions.
Internal Resettable fuse for protection of device against voltage fluctuations(N.A. for H3PT-MU). Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal
ELECTRONIC TIMERS
H - SERIES
LED indication for timing in progress
Front protective cover for safety.
Timer and base available for Track(except H3D1).
Large transparent knob with lock is provided for precise time setting and protect from unintentional change of time setting.
H1DA-X : Accepts any voltage from 12V AC/DC to 240V AC / 220V DC as signal between command contacts for timing initiation.
7 segment display indication for channel and timing operation (except ST-4M1).
User friendly programming for ON/OFF time selection independently (except ST-4M1).
Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
ST-15M2 / ST-4M1 : continuous start signal.
S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
Potential free (Zero volts) continuous start signal and continuous signal from differential pressure switch is mandatory for operating the timer.
ELECTRONIC TIMERS
S - SERIES
MODELS: S1DC8-M3
Suitable for screw mounting(except ST4-M1).
7 segment display indication for channel and timing operation (except ST-4M1).
User friendly programming for ON/OFF time selection independently (except ST-4M1).
Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
ST-15M2 / ST-4M1 : continuous start signal.
S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
Potential free (Zero volts) continuous start signal and continuous signal from differential pressure switch is mandatory for operating the timer.
ELECTRONIC TIMERS
S - SERIES
MODELS: ST6-M1, ST10-M1, ST10-M2
Suitable for screw mounting(except ST4-M1).
7 segment display indication for channel and timing operation (except ST-4M1).
User friendly programming for ON/OFF time selection independently (except ST-4M1).
Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
ST-15M2 / ST-4M1 : continuous start signal.
S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
Potential free (Zero volts) continuous start signal and continuous signal from differential pressure switch is mandatory for operating the timer.
ANNUNCIATORS
MODELS: M2-24, M2-20, M2-16, M2-12
Suitable for screw mounting(except ST4-M1).
7 segment display indication for channel and timing operation (except ST-4M1).
User friendly programming for ON/OFF time selection independently (except ST-4M1).
Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
ST-15M2 / ST-4M1 : continuous start signal.
S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
Potential free (Zero volts) continuous start signal and continuous signal from differential pressure switch is mandatory for operating the timer
PRESET COUNTERS ( CT - 5 and H3CT - 5U)
MODELS: CT - 5, H3CT - 5U
Din sized enclosure for panel mounting.
Wide Voltage range
Front / Rear reset facility provided.
Hold / Restart options (selectable) during power failure.
Input signal from proximity switch ( NPN / PNP type) or Potential free (zero volt) signal from limit switch, relay o/p etc
Over-voltage protection
CT-5: Digital, single window 5 digit 7 segment red LED display with up counting for process value.
Preset Counts can be programmed with the help of thumbwheel switch
H3CT-5U : Digital, single window 5 digit 7 segment red LED display with up counting for both process value and set value
Input sensitivity – programmable (1-100Hz)
Internal Resettable fuse for protection of device against voltage fluctuations. Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal.
TACHOMETERS
MODELS: DT - 2001B
Micro-controller based design with world class Indian software.
Non-contact sensing through reflected light beam on reflective sticker.
LCD display
Input sensing indication through LED.
Memory facility to retain measured value.
Portable, lightweight, strong and elegant ABS enclosure.
Accuracy: 1RPM up to 5,000 RPM and 0.05% of the reading above 5,000 RPM.
Resolution: 0.1RPM up to 5,999 RPM and 1RPM at and above 6,000RPM.
Calibration certificate provided along with tachometer - traceable to national and international standards.
TIME SWITCHES
MODELS: TS - 203, TS - 203B
Switches On and Off 4 times in a day with respect to real time.
LED indication for relay status, LCD display for real time clock.
User friendly programming with manual over ride facility.
Clock hour and Clock minute buttons can be enabled by shorting terminals to program RTC.
For TS-203, TS-203B : Use (1.5Vx2)AA size Batteries
Due to continuous development more products are being added periodically, please contact us for products not listed here.
