Process Control Instrument manufacturers and suppliers of Temperature control instruments, Timers, Recorders, pH instruments etc.

PROCESS INDICATOR MODEL 408

FEATURES:

Microcontroller Based
• Bright red LED display 0.5", 0.8"
• Full 4 digit display.
• Accepts Linear & Non-Linear inputs.
• Highly accurate and stable display.
• Easily programmable for input type and range through front keypad.
• Full Software/Hardware calibration.
• RS-485 communication port for SCADA applications.
• Housing for protection in corrosive and hazardous atmosphere.
• Transmitter power supply available.

TEMPERATURE INDICATOR MODEL 405

FEATURES:

Microcontroller Based
• Bright red LED display 0.5", 0.8"
• Full 4 digit display.
• Accepts Linear & Non-Linear inputs.
• Highly accurate and stable display.
• Easily programmable for input type and range through front keypad.
• Full Software/Hardware calibration.
• RS-485 communication port for SCADA applications.
• Housing for protection in corrosive and hazardous atmosphere.
• Transmitter power supply available.
• Alarm/trip relay outputs

DIGITAL TEMPERATURE INDICATOR - DTI 9100

DTI 9100 is designed to interface with specified T/C or RTD sensor it has field proven circuits, ruggedness & reliability of 16 years of our operation.

DTI 9100 incorporate signal conditional module, an A/D Converter with LCD display all using low power instigated circuits. SPAN and ZERO adjustments are provided inside the instruments.

DTI 9100 meets the need for simple temperature readout with accuracy and economy.

Display: 3/12 DGT 12 mm high LCD, Input: J, K, PT100

DIGITAL TEMPERATURE INDICATOR - DTI 9200

Model DTI 9200 Digital Temperature Indicator Micro-controller based, micropower, precision general purpose thermometer designed for used with type J, K, T, R, S, & RTD – PT100 sensors.

Display: 5 DGT 15 mm high LCD, Input: J, K, T, R, S, PT100

TEMPERATURE CONTROLLER MODEL 5002U

FEATURES:

• Premium On/Off controller for versatile operation.
• High accuracy of 0.1% FS.
• Unique one shot CAL algorithm.
• Universal inputs- T/C, RTD, MA, V.
• Upto 4 independent programmable relay output.
• Full programming by front pane keys.

TEMPERATURE CONTROLLER MODEL 506

FEATURES:

Microcontroller Based

• ± 0.25% FS T/C & RTD inputs
• ± 0.1% FS mA & Voltage inputs
• Easy to use membrane key pad.
• Dust-proof membrane front.
• Thermocouple, RTD, Voltage or Current Input.
• ON/OFF control application.
• Furnace application.
• Chiller application.
• Two independent set points.
• Low cost.

TEMPERATURE CONTROLLER MODEL 5006

FEATURES:

• Micro-controller based cost-effective indicator / controller.
• High performance.
• Digital calibration.
• Single / Dual relay output.
• Dust protected tactile keys.
• On-site configurable and universal.

TEMPERATURE CONTROLLER MODEL 5006H

FEATURES:

• Micro-controller based cost-effective indicator / controller.
• High performance.
• Digital calibration.
• Large, 20mm (0.8") Red LED display.
• Two relay output.
• On-site configurable and universal.

TEMPERATURE CONTROLLER MODEL 5007

FEATURES:

• Micro-controller based cost-effective indicator / controller.
• Field selectable universal input.
• Digital calibration.
• Single / Dual relay output.
• Dust protected tactile keys.
• On-site configurable.

TEMPERATURE CONTROLLER MODEL H3TX - 2U

Function: ON-OFF temperature controller SELF TUNE temperature controller.
Rated Supply: 85V to 270V AC/DC
Rated Frequency: 50/60 Hz ±5% for AC only
Power Consumption: AC Aprox.4VA / 1W
Control Output: 1 C/O contact rated for 5A@250V AC/28V DC resistive load.
Dispaly Accuracy: ±(0.5% of full scale)±10 C
Hysterisis: 20° C -200° C (for ON/OFF function only)

ON / OFF TEMPERATURE CONTROLLER MODEL H3TX - U

FEATURES:

• Universal Input (J, K, PT - 100) Selectable.
• Wide Voltage Range.
• ON/OFF or Self/Tuned Function Selectable.
• Indication for relay status and sensor failure
• Automatic cold junction compensation.
• Elegant enclosure with protective cover.
• Single/Double set point.

TEMPERATURE INSTRUMENTS MODEL EX9 - 2H - U

Function: 2 Set Point temp. Controller (Heater type)
Rated Supply: Voltage 85V to 270V AC/DC
Rated Frequency: 50/60 Hz ±5% for AC only
Power Consumption: AC Aprox.4VA / 1W
Control Output: 1 C/O contact rated for 5A @ 250V AC/ 28V DC resistive load for each set point
Dispaly Accuracy: ±(0.5% of full scale)±10 C
Hysterisis: 20° C -200° C

PID CONTROLLERS MODEL CN40

FEATURES:

• Low Cost with High Functional Value.
• Auto Tuning to get automatic P.I.D. Values for improved control stability
• 4 Digits LED (PV & SV).
• Thermocouple / RTD field selectable.
• Output Relay or SSR and Alarm Relay.
• Various Event Functions
• Sensor Break Protection.
• 100 to 240V AC Power Supply (-15,+10%)

PID CONTROLLERS MODEL TTM J4 / J5

FEATURES:

• Self-Tuning PID.
• Blind Function.
• Simplified Timer.
• Priority Display.
• Multiple Inputs : Thermocouple/R.T.D. (Pt 100 & JPt 100) are selectable by front key.
• Compact Size
• Manual Control (Balance less & Bump less)
• Digital PV Filter
• PID Over-Shoot Protection
• Heating/Cooling Control
• Shift setting of OFF position during ON/OFF control,
  for both output 1 & 2.

PID CONTROLLERS MODEL TTM 300 SERIES

FEATURES:

• Built in fuzzy logic function.
• Blind Function.
• Communication function of DIN 1/16 size.
• Diversified contact outputs.
• Easy to read 4 - digit display.

PID CONTROLLERS MODEL 5030

FEATURES:

• One unit accepts many input types.
• Input and Output type field configurable.
• Configuration, Programming, Operation & Calibration by front panel keys.
• Three level security access by DIP switches.
• Independent display of set-point, process variable and control output/ value position.
• Remote set-point, Transmitter power supply & two configurable auxiliary relays.
• Digit shift key for speedier setting.
• RS232 / 485 communication port option for Remote Programming & Data Acquisition.
• Sealed membrane keyboard.