 SWITCHED MODE POWER SUPPLIES |
SWITCHED MODE POWER SUPPLIES |
SMPS |
The range includes:
- Single Output type in
- 5V/ 12V/ 24V/ 48V
- Currents of 0.6 Amps to
100 Amps
- Dual output type
- Triple output type
- Quad output type
- DIN RAIL Type
- 3 phase AC input type.
|
 |
|
DC TO DC CONVERTERS |
|
For Quantity requirements we offer various DC to DC Converters.
Example:
- Input of 18 to 36VDC and Output 12VDC (or 24VDC)
- Input of 36 to 72VDC and Output 48VDC
Please let us know your exact specifications so that we can offer the
product best suited for your requirement.
|
|
TRANSMITTER POWER SUPPLIES |
TRANSMITTER POWER SUPPLIES |
|
FEATURES:
- Universal AC input/Full range
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- NEC class 2 / LPS compliant
- LED indicator for power on
- No load power consumption<0.75W
- 100% full load burn-in test
- 3 years warranty
- Built in DC OK active signal
|
|
VARIABLE DC POWER SUPPLIES |
POWER SUPPLY 1000, 2000 & 9000 |
These series of DC Power supplies are continuously variable,
portable, low-cost, general purpose DC Stabilized power supplies
for use in laboratory experiments and shop-floor experiments.
These series incorporates protection against short-circuit and
overload using state-of-the-art electronic circuitry with
continuously variable maximum current limit, adjustable from
above 10% to 110% of full load current. The unit are fully solid
state and use silicon devices to ensure high stability are reliable
operation. All models can be electrically floated up to 300 VDC
off ground. Meters used are moving coil types with an accuracy
of ± 2% F.S.D. Pre-regulator circuits are used for 5A and higher
rating units. |
|
|
|
 |
|
Latest @ DP |
|
|
 |
|
|
|
 |
|
